ETN EVO – lined magnetic drive
Sub-ISO 2858 single-stage, magnetic drive centrifugal pumps lined in plastic and fluoroplastic material.
Suitable for pumping aggressive and hazardous liquids (slightly contaminated, clean, low viscosity) for the chemical, petrochemical and pharmaceutical industries.
Made with the same reliability as the UTN pumps, but suitable for discontinuous services.
The ETN Evo range can reach temperatures up to +120°.
Available in monobloc version.
Main technical specifications of the model:
| Sealing System: | Magnetic Drive |
| Design: | EN 22858; ISO 2858 |
| Casing Material: | ETFE Lined – PP Lined |
| Bushings/Shaft Material: | Graphite/SSIC/Ceramic PTFE-Carbon |
| Casing Type: | Radially split-Volute Casing |
| Impeller Material: | ETFE Lined – PP Lined |
| Impeller Type: | Closed |
| Nozzle Position: | End suction |
| Execution: | Horizontal – Close-Coupled |
| Pull-out design: | Yes |
| Heating Jacket: | NA |
| Connection Type: | Flange |
| Flanges: | UNI 1092-2 (ISO 7005-2) PN16RF slotted to ANSI 150 |
| Self-priming: | Non-priming |
| Lubrication: | NA |
| Maximum Pressure Rating @20°C: | PN 10 |
| Fluid Temperature Range: | PP: -10°C / +65°C ETFE: -15°C / +120°C |
| Maximum Head @ 2900 RPM: | 35m |
| Maximum Flow Rate @ 2900 RPM: | 60 m³/h |
| Viscosity Range: | 0,5 cSt – 150cSt |
| Maximum Installed Power: | 7,5 kW |
Subscribe to our newsletter
Be the first to hear about the latest products and most important news.
"*" indicates required fields